Transports Show - Ericsson HM4x0 Reference Manual

23.5

transports show

23.5.1 Syntax
transports show {<name>|<number>}
23.5.2 Description
This command displays detailed information about an existing transport. The
information displayed depends on the transport type selected.
23.5.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
23.5.4 Example
--> transports show LanTransport
Ethernet Status
Service
Creator
Description
Atm Protocol
Ethernet
If In Octets
If Out Octets
If In Errors
If Out Errors
Packets Sent
Good Packets
Enabled
Channel Snmp If Index : 0
Termination
Ether Channel
Port
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
transport. To display transport names,
use the transport list command.
A number that identifies an existing
transport. To display transport
numbers, use the transport list
command.
: CLI
: LanTransport
: None
: 0
: 0
: 0
: 0
: 0
: 0
: true
: Bridge Interface: LAN
: eth_lan
Transports CLI Commands
Default value
N/A
N/A
675