Security Add Interface - Ericsson HM4x0 Reference Manual

19.7

security add interface

19.7.1 Syntax
security add interface <name> {external|internal|dmz}
19.7.2 Description
This command adds an existing IP interface to the Security package to create
a security interface, and specifies what type of interface it is depending on
how it connects to the network.
Once you have added security interfaces, you can use them in the NAT and/or
Firewall configurations.
19.7.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
external
internal
dmz
19.7.4 Example
--> security add interface ip1 internal
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing IP
interface. To display interface names,
use the ip list interfaces
command.
An interface that connects to the
external network.
An interface that connects to the
internal network.
An interface that connects to the de-
militarized zone (DMZ).
Security CLI Commands
Default value
N/A
N/A
N/A
N/A
547