Bridge Set Interface Regenpriority - Ericsson HM4x0 Reference Manual

4.35

bridge set interface regenpriority

4.35.1 Syntax
bridge set interface {<name>|<number>} regenpriority
<pri0> <pri1> <pri2> <pri3> <pri4> <pri5> <pri6> <pri7>
4.35.2 Description
This command specifies the mapping of user priority in the incoming frames to
the regenerated user priority that would be used for traffic class mapping as
well as set in the VLAN tag of the outgoing frame. See the bridge show
interface regenpriority command to see the user priority to the
regenerated user-priority mapping.
4.35.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
pri0
pri1
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
bridge interface. To display interface
names, use the bridge list
interfaces command.
A number that identifies an existing
bridge interface. To display interface
numbers, use the bridge list
interfaces command. The
number appears in the first column
under the heading ID.
The regenerated user-priority to
which the user priority with value 0
in the incoming frame should be
mapped.
The regenerated user-priority to
which the user priority with value 1
in the incoming frame should be
mapped.
Bridge CLI Commands
Default value
N/A
N/A
0
1
75