Ericsson HM4x0 Reference Manual page 540

Security CLI Commands
−
−
For information on NAT commands, see chapter 14 - NAT CLI Commands.
For information on stateful Firewall commands, see chapter 10 - Firewall CLI
Commands.
The table below lists the Security commands provided by the CLI:
security enable|disable
security enable|disable
blockinglog|intrusionlog|
sessionlog
security add interface
security delete interface
security show interface
security delete management-
station
security set management-station
security add trigger netmeeting
security delete trigger
security set trigger
addressreplacement
security set trigger
binaryaddressreplacement
security set trigger endport
security set trigger
secondaryendport
security set trigger
sessionchaining
security show trigger
security set IDS blacklist
540
set security levels and policies that determine whether traffic between
interfaces is allowed or blocked.
set portfilters to determine which ports and protocols are allowed or
blocked.
security status
security set blockinglog|intrusionlog|
sessionlog level
security clear interfaces
security list interfaces
security add management-station
range
security list management-station
security add trigger tcp|udp
security clear triggers
security list triggers
security set trigger multihost
security set trigger maxactinterval
security set trigger startport
security set trigger secondarystartport
security set trigger
UDPsessionchaining
security enable|disable IDS
security set IDS DOSattackblock
2/1553-ZAT 759 94 Uen B – December 2005