Pppoe Set Transport Qosclass - Ericsson HM4x0 Reference Manual

17.36

pppoe set transport qosclass

17.36.1 Syntax
pppoe set transport {<name>|<number>} qosclass
{ubr|cbr|vbr|vbrrt|abr|qfc}
17.36.2 Description
This command sets the quality of service class for an existing PPPoE
transport that performs dialout over PVC.
17.36.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
ubr
cbr
vbr
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
PPPoE transport. To display transport
names, use the pppoe list
transports command.
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the pppoe list
transports command.
Unspecified Bit Rate; non-constant
and unpredictable data transport rate.
PCR (Peak Cell Rate) is the average
and maximum speed of transmission.
Constant Bit Rate; constant demand
and predictable data transport rate.
PCR is the average and maximum
speed of transmission.
Variable Bit Rate; non-constant but
predictable data transport rate that
uses Non-Real-Time (NRT). You can
specify the PCR, SCR, BT and MBS
for VBR traffic.
PPPoE CLI Commands
Default value
N/A
N/A
UBR
491