Ericsson HM4x0 Reference Manual page 451

Option
interface
port
vpi
vci
concen
trator
service
name
17.2.4 Example
--> pppoe add transport pppoe1 dialout pvc 1 a1 0 800
accessconcentrator server32 servicename mercury
2/1553-ZAT 759 94 Uen B – December 2005
Description
The PPP interface to a channel that
transports PPPoE data. A single
interface can be used by multiple
channels. The interface value can be
any positive integer.
The system port that is used to
transport ATM data.
A field in the ATM header. The VPI is
used to identify the virtual path that a
circuit belongs to. The VPI can be any
value between 0 and 4095.
Part of the ATM header. The VCI is a
tag that identifies which channel a cell
will travel over. The VCI can be any
value between 1 and 65535.
A PPPoE tag that identifies a remote
access concentrator (or PPPoE
server). PPPoE will only connect to
the named access concentrator. If no
concentrator tag is set, PPPoE
connects to the first access
concentrator that responds. The tag
name/number is determined by your
ISP.
A PPPoE tag that identifies a specific
service that is acceptable to the
PPPoE client. If set, the PPPoE
transport will connect to the first
access concentrator it finds that uses
this service. If an access concentrator
is also set, the PPPoE transport will
connect to the specified service on the
named concentrator. The service
name is determined by your ISP.
PPPoE CLI Commands
Default value
N/A
N/A
N/A
N/A
N/A
N/A
451