Table of Contents
Advertisement
15.5
port a1 set
15.5.1
Syntax
port a1 set <attribute> <value>
15.5.2
Description
This command allows you to modify attributes on the a1 port. Any
modifications override existing attribute values specified in your device and
compiled at run-time.
To display a list of valid attributes for a specific port, use the '?' syntax options
key after port <portname> set. For example:
--> port a1 set ?
15.5.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
attribute
value
15.5.4
Example
--> port a1 set Enabled true
A complete list of available attributes and their corresponding values are
provided in the table on the next page.
2/1553-ZAT 759 94 Uen B – December 2005
Description
A single attribute of a specified port.
An attribute has a value attached to it
which you can modify.
A value attached to an attribute. The
value could be a numerical setting or a
true/false qualifier.
Port CLI Commands
Default value
N/A
N/A
369
Advertisement
Table of Contents
