Bridge Show Fdb - Ericsson HM4x0 Reference Manual

4.31

bridge show fdb

4.31.1 Syntax
bridge show fdb {<fdbname>|<fdbnumber>}
4.31.2 Description
This command displays the statistical information of a single user-configured
filtering database. It displays the following information:
•
•
•
4.31.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
fdbname
fdbnumber
4.31.4 Example
--> bridge show fdb FDB_1
2/1553-ZAT 759 94 Uen B – December 2005
Number of VLANs associated with it.
Number of dynamic unicast filtering entries within it.
Number of frames discarded due to filtering database overflow.
Description
A name that identifies an existing
Filtering Database. See the bridge
add vlan command to configure a
new filtering database.
A number that identifies an existing
Filtering Database. To display the
list of FDBs, use the bridge list
fdbs command. The number
appears in the first column under the
heading ID.
Bridge CLI Commands
Default value
N/A
N/A
71