Dhcpserver Add Fixedhost - Ericsson HM4x0 Reference Manual

DHCP Server CLI Commands
6.6

dhcpserver add fixedhost

6.6.1 Syntax
dhcpserver add fixedhost <name> <ipaddress> <macaddress>
6.6.2 Description
This command creates a new fixed host mapping in the DHCP server. This
allows you to configure the DHCP server to assign a specific IP address to a
specific DHCP client based on the client's MAC address. If a
DHCPDISCOVER or DHCPREQUEST is received from a DHCP client with a
matching MAC address, it will have the specified fixed IP address assigned to
it. You must also create a suitable DHCP subnet definition in order for fixed
host mapping to work.
Note:
6.6.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
ipaddress
macaddress
154
If you create a fixed host mapping with an IP address that is already
present inside a configured, dynamic IP range, the fixed host IP
address will override the address in the dynamic range.
Description
An arbitrary name that identifies the
fixed host mapping. It can be made
up of one or more letters or a
combination of letters and digits, but
it cannot start with a digit.
The IP address that is assigned to a
DHCP client based on the client's
MAC address, displayed in the
following format:
192.168.102.3
A MAC address displayed in the
following format:
##:##:##:##:##:##
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005