System Add Login - Ericsson HM4x0 Reference Manual

System CLI Commands
22.2.5 Example
--> system add user fred "test user"
22.3

system add login

22.3.1 Syntax
system add login <name> ["comment"]
22.3.2 Description
This command adds a user to the system. Only a Super user can use this
command.
22.3.3 Default setting
The default setting in the table below are applied to new accounts added using
the system add login command. (A different set of defaults are applied to a
new account added using the system add user command).
Option
dialin to the system
login to the system
configuration permissions
access permissions
22.3.4 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
comment
642
Description
A unique name made up of more than
one character that identifies an
individual user and lets the user
access the system.
An optional comment about the user
that is displayed when you list
users/logins.
Default setting
disabled
enabled
enabled
default user
Default value
N/A
Blank
2/1553-ZAT 759 94 Uen B – December 2005