Table of Contents
Advertisement
PPPoA CLI Commands
16.8
pppoa set transport bt
16.8.1
Syntax
pppoa set transport {<name>|<number>} bt <burst
tolerance>
16.8.2
Description
This command applies to existing PVC transports – it does not apply to SVC
transports. This command sets the burst tolerance (bt) for an existing PPPoA
transport. This command is only valid if you set VBR or VBR RT as the QoS
Class using the pppoa set transport qosclass command.
16.8.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
burst
tolerance
16.8.4
Example
--> pppoa set transport pppoa1 bt 5
392
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
Controls the duration of traffic bursts
on VBR (Variable Bit Rate) and VBR
RT (VBR Real Time) channels. This
value overrides an existing MBS value
(if set). The BT can be any value
between 0 and 100.
Default value
N/A
N/A
0
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
