Transports Delete - Ericsson HM4x0 Reference Manual

23.3

transports delete

23.3.1 Syntax
transports delete {<name>|<number>}
23.3.2 Description
This command deletes a single transport that was created using the
<transport_module> add transport command.
23.3.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
23.3.4 Example
--> transports delete eth1
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
transport. To display transport names,
use the transport list command.
A number that identifies an existing
transport. To display transport
numbers, use the transport list
command.
Transports CLI Commands
Default value
N/A
N/A
673