Pppoa Set Transport Autoconnect - Ericsson HM4x0 Reference Manual

16.7

pppoa set transport autoconnect

16.7.1 Syntax
pppoa set transport {<name>|<number>} autoconnect
{enabled|disabled}
16.7.2 Description
This command allows you to enable/disable the PPPoA autoconnect function.
If enabled, PPPoA automatically connects to TCP/IP whenever a user
requests TCP/IP packets from a public destination.
16.7.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
enabled
disabled
16.7.4 Example
--> pppoa set transport pppoa1 autoconnect enabled
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
Enables PPPoA autoconnect.
Disables PPPoA autoconnect.
PPPoA CLI Commands
Default value
N/A
N/A
disabled
391