1.8.9
AUX Port cable
Standard ISDN cabling
1.8.10
Fibre cables
The optical interfaces for the OMS 870 are based on the LC
connector. In case other connector types is preferable by an
operator, a patch cord can be utilised to convert physical interfaces
e.g. LC-FC/PC, LC-SC/PC, LC-E2000 etc. The LC connector used
in patch cords are of a 90-degree type. The cable diameter is
1.6mm.
The fibre handling should have a minimum bending radius of 30mm.
It also supports a physical load of 60N.
A possible solution is shown in Figure 8
Figure 8 Proposed fiber handling
1/1531-CRA 119 0513/30 Uen A 2007-11-15
Marconi OMS 870 R3.0 Quick Reference Guide
1-21