Bridge Add Fwdallinterface Independent - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.46

bridge add fwdallinterface independent

4.46.1 Syntax
bridge add fwdallinterface independent
{<vlanname>|<vlannumber>} <interfacename>
4.46.2 Description
This command adds an interface to the egress interface list of the Forward All
Group of the named VLAN. The Forward All Group represents the set of
interfaces to which all the multicast frames would be forwarded.
4.46.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
vlanname
vlannumber
interface
name
4.46.4 Example
--> bridge add fwdallinterface independent VLAN_1
bridge1
88
Description
The name of an existing VLAN. See
the bridge add vlan command
to configure a new VLAN.
A number that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
The number appears in the first
column under the heading ID.
The name of a bridge interface that
has previously been added and
attached to a transport using the
bridge add interface and
bridge attach commands.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005