Security Set Trigger Sessionchaining - Ericsson HM4x0 Reference Manual

Security CLI Commands
19.29

security set trigger sessionchaining

19.29.1 Syntax
security set trigger <name> sessionchaining
{enable|disable}
19.29.2 Description
This command determines whether or not a triggering protocol can be
chained. If session chaining is enabled, TCP dynamic sessions also become
triggering session, which allows multi-level session triggering.
19.29.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
enable
disable
19.29.4 Example
--> security set trigger t4 sessionchaining enable
572
Description
A name that identifies an existing
trigger. To display trigger names, use
the security list triggers
command.
Enables TCP sessionchaining on an
existing trigger.
Disables all session chaining (TCP
and UDP) on an existing trigger.
Default value
N/A
disable
2/1553-ZAT 759 94 Uen B – December 2005