Ericsson HM4x0 Reference Manual page 250

IP CLI Commands
ip add route
ip delete route
ip set route advertise
ip set route destination
ip set route interface
ip clear arpentries
ip interface add
proxyarpexclusion
ip interface clear proxyarpentries
ip interface delete
proxyarpentries
ip interface delete
staticarpentries
ip interface list static arpentries
ip interface add
secondaryipaddress
ip interface delete
secondaryipaddress
ip list appservices
ip show appservice
12.1.1 IP Tracing Commands
You can carry out tracing in the IP stack using the following system
commands:
•
•
250
Secondary IP address commands:
AppService IP commands:
system log enable/disable; enables/disables the tracing support output
for a specific module and category.
system log list; displays the tracing options for the modules available in
your current image.
ip clear routes
ip list routes
ip set route cost
ip set route gateway
ip show route
IP ARP commands:
ip interface add proxyarpentry
ip interface add staticarpentry
ip interface clear staticarpentry
ip interface delete proxyarpexclusion
ip interface list proxyarpentries
ip list arpentries
ip interface clear secondaryipaddress
ip interface list secondaryipaddresses
ip set appservice
2/1553-ZAT 759 94 Uen B – December 2005