Dhcpserver Set Subnet Assignautodomain - Ericsson HM4x0 Reference Manual

DHCP Server CLI Commands
6.24

dhcpserver set subnet assignautodomain

6.24.1 Syntax
dhcpserver set subnet {<name>|<number>} assignautodomain
{enabled|disabled}
6.24.2 Description
This command sets DHCP server to automatically pick up the domain name
configured in DNS relay and hand it out to DHCP clients on one or more of the
subnets being administered by DHCP server.
6.24.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
enabled
disabled
6.24.4 Example
--> dhcpserver set subnet sub1 assignautodomain enabled
174
Description
A name that identifies an existing
subnet. To display subnet names, use
the dhcpserver list subnets
command.
A number that identifies an existing
subnet. To display subnet numbers,
use the dhcpserver list
subnets command.
DHCP server passes the local
device's domain name (set up in DNS
relay) to all DHCP clients on the LAN.
DHCP server does not pass the local
device's domain name (set up in DNS
relay) to all DHCP clients on the LAN.
Default value
N/A
N/A
disabled
2/1553-ZAT 759 94 Uen B – December 2005