Table of Contents
Advertisement
DHCP Client CLI Commands
5.28
dhcpclient set interfaceconfig server
5.28.1
Syntax
dhcpclient set interfaceconfig {<name>|<number>} server
<ipaddress>
5.28.2
Description
If dhcpclient set dhcpinform has been set to enabled, this command
will unicast the first DHCPINFORM message to the specific DHCP server at
the specified IP address. If the first unicast fails, the DHCPINFORM will default
to broadcasting its messages.
5.28.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
ipaddress
5.28.4
Example
--> dhcpclient set interfaceconfig config1 server
192.168.101.2
144
Description
A name that identifies an existing
DHCP client interface. To display
client interface names, use the
dhcpclient list
interfaceconfigs command.
A number that identifies an existing
DHCP client interface. To display
client interface numbers, use the
dhcpclient list
interfaceconfigs command.
The IP address of a DHCP server
that DHCP client can use to obtain
configuration parameters. The IP
address is displayed in the following
format:
192.168.102.3
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
