Table of Contents
Advertisement
SNMP CLI Commands
20.10
snmp set config syscontact
20.10.1
Syntax
snmp set config syscontact <contactDetails>
20.10.2
Description
This command allows you to set contact details for the person responsible for
maintaining your SNMP agent. When a request for contact details is received
from the SNMP manager, the details set by this command are returned.
20.10.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
contact
details
20.10.4
Example
--> snmp set config syscontact ck@email.com
618
Description
Contact details (e.g., telephone
number, email address) for the person
responsible for maintaining the SNMP
agent system. The details are
represented by a string of up to 255
characters (no spaces). To display the
contact details, use the snmp show
config command.
Default value
N/A
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
