Bridge Set Interface Numtrafficclasses - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.37

bridge set interface numtrafficclasses

4.37.1 Syntax
bridge set interface {<name>|<number>} numtrafficclasses
<numtrafficclasses>
4.37.2 Description
This command specifies the number of traffic classes supported by the bridge
interface.
4.37.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
numtraffic
classes
4.37.4 Example
--> bridge set interface bridge1 numtrafficclasses 7
78
Description
A name that identifies an existing
bridge interface. To display interface
names, use the bridge list
interfaces command.
A number that identifies an existing
bridge interface. To display interface
numbers, use the bridge list
interfaces command. The
number appears in the first column
under the heading ID.
A value that specifies the number of
traffic classes supported by the
bridge interface. It can be any value
between 1 and 8. See the bridge
show interface
trafficclassmap to see the
number of traffic classes supported
by an interface, and also the traffic
class mapping.
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005