Security Set Trigger Multihost - Ericsson HM4x0 Reference Manual

Table of Contents

Advertisement

19.22

security set trigger multihost

19.22.1
Syntax
security set trigger <name> multihost {enable|disable}
19.22.2
Description
This command sets whether or not a secondary session can be initiated
to/from different remote hosts or the same remote host on an existing trigger.
19.22.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
enable
disable
19.22.4
Example
--> security set trigger t1 multihost enable
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
trigger. To display trigger names, use
the security list triggers
command.
A secondary session can be initiated
to/from different remote hosts.
A secondary session can only be
initiated to/from the same remote host.
Security CLI Commands
Default value
N/A
disable
565

Advertisement

Table of Contents
loading

Table of Contents