Ericsson HM4x0 Reference Manual page 376

Port CLI Commands
Attribute
FragThreshold
HideSSID
IntraBSSRelay
MacAddressAuth
MacAddressList
OutputPower
376
Description
<value>
The FragThreshold configures the
fragmentation size that is used when
dividing 802.11 frames into smaller
pieces (fragments) that are sent
separately to the destination
false | true
Configuring HideSSID to true will force
the AP not to advertise its SSID via the
beacon and hence only clients that
know that this SSID exists can
associate with the AP.
false | true
Configuring IntraBSSRelay to false will
prevent wireless clients to
communicate directly with each other
via the AP.
Blacklist | Whitelist | disabled
The MAC addresses entered in the
MacAddressList can be either
Blacklisted or Whitelisted. If they are
Blacklisted all MAC addresses that is
entered in the MacAddressList will be
blocked by the AP. If Whitelisted is
selected, only the MAC addresses in
the MacAddressList will be allowed, all
other will be blocked.
<index> (0-31) <value> (macaddress)
MAC addresses that either should be
blacklisted or whitelisted can be
configured here. Each new MAC
address needs a unique index value
(between 0 and 31). The MAC address
is entered in the form xx:xx:xx:xx:xx:xx
(i.e. 00:0b:cd:5a:b2:01).
<value>
This value is related to how much
output power the radio card will
transmit at. The valid <value> range is
00.00 – 20.00. The value is the e.i.r.p
value expressed in dBm.
Default value
2346
false
true
disabled
N/A
20
2/1553-ZAT 759 94 Uen B – December 2005