Bridge Delete Vlan - Ericsson HM4x0 Reference Manual

4.20

bridge delete vlan

4.20.1 Syntax
bridge delete vlan {<name>|<number>}
4.20.2 Description
This command deletes a single statically configured VLAN from the bridge. All
the egress interfaces and multicast filtering entries (for an IVM configuration)
associated with the VLAN are also deleted by this command.
If a VLAN is the last VLAN associated with its FDB, the FDB along with the
unicast and multicast filtering entries and forward all/unregistered group
entries are also deleted from the bridge.
4.20.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
4.20.4 Example
--> bridge delete vlan VLAN_1
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
To display the list of all the static
and dynamic VLANs in the bridge,
use the bridge list vlans
command.
A number that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
The number appears in the first
column under the heading ID.
Bridge CLI Commands
Default value
N/A
N/A
57