Security Application Add Port - Ericsson HM4x0 Reference Manual

Security CLI Commands
19.56

security application add port

19.56.1 Syntax
security application <application> add port <startport>
<endport> <TCP|UDP|TCP and
UDP|ICMP|MGP|RSVP|GRE|OSPF|IPIP|ALL> {true
<NONE|TCP|UDP|TCP and UDP>|false}
19.56.2 Description
This command configures the protocol, port and trigger details for a specified
application. Additional port configurations can be added to a security
application by repeating this command.
Note:
19.56.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
application
startport
endport
602
You cannot create a new port configuration if it overlaps with an
existing port configuration range. To check existing port
configurations, use the security application list ports
commands.
Description
The <shortname> that identifies an
existing security application. To
display security application names,
use the security list
applications command.
The start of the port range used by the
specified protocol.
The end of the port range used by the
specified protocol.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005