Bridge Clear Vlaninterfaces - Ericsson HM4x0 Reference Manual

4.28

bridge clear vlaninterfaces

4.28.1 Syntax
bridge clear vlaninterfaces {<name>|<number>}
[{tagged|untagged}]
4.28.2 Description
This command provides three different options to delete:
•
•
•
4.28.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
2/1553-ZAT 759 94 Uen B – December 2005
All tagged interfaces.
All untagged interfaces.
All the egress interfaces; i.e. all tagged and untagged interfaces of the
named VLAN.
Description
A name that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
To display the list of all the static
and dynamic VLANs in the bridge
use the bridge list vlans
command. This command also
displays the egress interface list for
each VLAN.
A number that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
The number appears in the first
column under the heading ID.
Bridge CLI Commands
Default value
N/A
N/A
67