Pppoa Set Transport Remotedns - Ericsson HM4x0 Reference Manual

PPPoA CLI Commands
16.36

pppoa set transport remotedns

16.36.1 Syntax
pppoa set transport {<name>|<number>} remotedns
<ipaddress> [<ipaddress2>]
16.36.2 Description
This command is a PPP server function.
This command sets the primary and secondary local DNS server addresses
that will be given to a remote PPP peer when the peer requests a primary or
secondary DNS server IP address using IPCP. Setting the secondary IP
address is optional.
If you want to delete an IP address, set the IP address to 0.0.0.0.
16.36.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
ipaddress
ipaddress2
426
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
The IP address of the primary local
DNS server displayed in the following
format:
192.168.102.3
The IP address of the secondary local
DNS server displayed in the following
format:
192.168.102.3
Default value
N/A
N/A
0.0.0.0
(no primary IP
address set)
0.0.0.0
(no secondary IP
address set)
2/1553-ZAT 759 94 Uen B – December 2005