IP CLI Commands
12.33
ip set rip password
12.33.1
Syntax
ip set rip password <password>
12.33.2
Description
This command sets an authentication string that is placed in RIP v2 packets if
ip set rip authentication is enabled.
12.33.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
password
12.33.4
Example
--> ip set rip password vancouver
290
Description
An authentication password used by
RIP v2 packets if ip set rip
authentication is enabled. The
password is a string of 0 to 16
characters.
Default value
N/A
2/1553-ZAT 759 94 Uen B – December 2005