PPPoA CLI Commands
16.37
pppoa set transport remoteip
16.37.1
Syntax
pppoa set transport {<name>|<number>} remoteip <ip-
address>
16.37.2
Description
This command sets the IP address supplied to the remote end of the PPP
connection during negotiation. This is particularly important for PPP dialin
transports.
16.37.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
ip-address
16.37.4
Example
--> pppoa set transport pppoa1 remoteip 192.168.103.2
428
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
The IP address of the remote 'server-
end' of an interface displayed in the
following format:
192.168.102.3
Default value
N/A
N/A
0.0.0.0
2/1553-ZAT 759 94 Uen B – December 2005