Table of Contents
Advertisement
Bridge CLI Commands
4.42
bridgevlan add transport
4.42.1
Syntax
bridgevlan add transport <transport> <vlanid>
4.42.2
Description
This command adds a transport for a VLAN that is used to attach an IP
interface.
The ip interface attachbridgevlan command is used to attach a
VLAN transport to an IP interface.
4.42.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
transport
vlanid
4.42.4
Example
--> bridgevlan add transport vtrans 2
84
Description
An arbitrary name that identifies the
transport. It can be made up of one
or more letters or a combination of
letters and digits, but it cannot start
with a digit.
A number that identifies an existing
VLAN. To display the list of VLANs
configured, use the bridge list
vlans command.
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
