Table of Contents
Advertisement
12.5
ip attachvirtual
12.5.1
Syntax
ip attachvirtual <name> <real_interface>
12.5.2
Description
This command creates a virtual interface. The virtual interface is associated
with a 'real' IP interface that has already been attached to a transport using
the ip attach command. You can attach multiple virtual interfaces to one
'real' IP interface.
12.5.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
real_inter
face
12.5.4
Example
--> ip attachvirtual ip_virtual ip_real
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing IP
interface that will be used as a virtual
interface. The IP interface should not
have a transport attached to it. To
display interface names, use the ip
list interfaces command.
A name that identifies an existing IP
interface. A virtual interface must be
associated with an existing 'real' IP
interface that is attached to a
transport. To display interface names,
use the ip list interfaces
command.
IP CLI Commands
Default value
N/A
N/A
255
Advertisement
Table of Contents
