Table of Contents
Advertisement
PPPoA CLI Commands
16.2
pppoa add transport dialin pvc
16.2.1
Syntax
pppoa add transport <name> dialin pvc <interface> <port>
<vpi> <vci>
16.2.2
Description
This command creates a PPPoA transport that accepts dialin connections over
a PVC (Permanent Virtual Circuit). It allows you to specify the following
information:
•
•
•
•
The port/VPI/VCI combination must be unique for each transport.
16.2.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
interface
port
384
The PPP interface to the channel that the PVC will use.
The ATM port that will transport data.
VPI (Virtual Path Identifier).
VCI (Virtual Circuit Identifier).
Description
An arbitrary name that identifies the
transport. It can be made up of one or
more letters or a combination of letters
and digits, but it cannot start with a
digit.
The PPP interface to a channel that
transports PPPoA data. A single
interface can be used by multiple
channels. The interface value can be
any positive integer.
The system port that is used to
transport ATM data.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
