Nat Delete Globalpool - Ericsson HM4x0 Reference Manual

NAT CLI Commands
14.6

nat delete globalpool

14.6.1 Syntax
nat delete globalpool <name> <interfacename>
14.6.2 Description
This command deletes a single address pool that was added to a specific
outside interface using the nat add globalpool command.
14.6.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
interfacename
14.6.4 Example
--> nat delete globalpool gp1 extinterface
346
Description
A name that identifies an existing
global IP address. To display global
IP addresses, use the nat list
globalpools command.
The name of an existing security
interface (external or DMZ) created
and connected to an inside interface
(DMZ or internal) using the nat
enable command. To display
security interfaces, use the
security list interfaces
command.
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005