Table of Contents
Advertisement
Option
outbound
both
ipaddress
hostipmask
10.12.4
Example
--> firewall add validator v1 ext-int both 192.168.102.3
255.255.255.255
2/1553-ZAT 759 94 Uen B – December 2005
Description
Validator blocks outgoing traffic based
on IP addresses.
Validator filters inbound and outbound
traffic based on IP addresses.
The IP address that you want to carry
out IP address validation on. The IP
address is displayed in the following
format:
192.168.102.3
The IP mask address. If you want to
filter a range of addresses, you can
specify the mask, e.g., 255.255.255.0.
If you want to filter a single IP address,
you can use the specific IP mask
address, e.g. 255.255.255.255.
Firewall CLI Commands
Default value
N/A
N/A
N/A
N/A
239
Advertisement
Table of Contents
