Snmp Set Config Sysname - Ericsson HM4x0 Reference Manual

20.13

snmp set config sysname

20.13.1 Syntax
snmp set config sysname <systemName>
20.13.2 Description
This command allows you to set a name for your SNMP agent. When a
request for the agent's object name is received from the SNMP manager, the
name set by this command is returned.
20.13.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
system
Name
20.13.4 Example
--> snmp set config sysname Jupiter
2/1553-ZAT 759 94 Uen B – December 2005
Description
The name that identifies the system
that the SNMP agent is running on.
The name is a string of up to 255
characters (no spaces). If you wish to
add spaces, enclose the description in
double quotation marks (" ").To display
the system name, use the snmp show
config command.
SNMP CLI Commands
Default value
N/A
621