Table of Contents
Advertisement
13.3
logger set host
13.3.1
Syntax
logger set host <host>
13.3.2
Description
This command sets the host IP address to which syslog messages should be
sent.
13.3.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
host
13.3.4
Example
--> logger set host 192.168.10.2
2/1553-ZAT 759 94 Uen B – December 2005
Description
The IP address of the host to which
syslog messages should be sent.
Logger CLI Commands
Default value
0.0.0.0
(unconfigured)
335
Advertisement
Table of Contents
