Table of Contents
Advertisement
SNMP CLI Commands
20.12
snmp set config syslocation
20.12.1
Syntax
snmp set config syslocation <systemLocation>
20.12.2
Description
This command allows you to configure the location of your SNMP agent.
When a request for the agent's location is received from the SNMP manager,
the location set by this command is returned.
20.12.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
system
Location
20.12.4
Example
--> snmp set config syslocation Ericsson
620
Description
A name that identifies the location of
the SNMP agent system. The location
is represented by a string of up to 255
characters (no spaces). If you wish to
add spaces, enclose the description in
double quotation marks (" "). To
display the system location, use the
snmp show config command.
Default value
N/A
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
