Ericsson HM4x0 Reference Manual page 340

NAT CLI Commands
name
interfacename
internal
dmz
14.2.4 Example
--> nat enable nat1 extinterface internal
340
An arbitrary name that identifies a
NAT object enabled between a
security interface and an interface
type. It can be made up of one or
more letters or a combination of
letters and digits, but it cannot start
with a digit.
The name of an existing security
interface (external or DMZ) that was
added to the Security package using
the security add interface
command. To display security
interfaces, use the security list
interfaces command.
Allows NAT to be enabled/disabled
between the interfacename and all
interfaces that belong to the internal
interface type.
Allows NAT to be enabled/disabled
between the interfacename and all
interfaces that belong to the DMZ
interface type. The interfacename
must be an external interface type.
N/A
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005