Ericsson HM4x0 Reference Manual page 371

Attribute
ClockType
CodeType
CodingGain
Defaults
DetectNoise
DyingGasp
EcFdmMode
FastRetrain
FramerType
HostControl
MaxBitsPerBin
MaxDownRate
2/1553-ZAT 759 94 Uen B – December 2005
Description
Crystal | Oscillator | NoChange
ADSL2 | AnnexA
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | auto
The gain due to trellis/RS coding. Its
value ranges from 0-7 dB. Auto
automatically selects the coding gain.
ADSL2 | ADSL2PlusAuto |
ADSL2PlusOnly | AnnexA | None
Disable | Enable
Disables/enables noise detection.
Disable | Enable
EC | FDM
EC – enables Echo Cancellation. This
setting is necessary if your device is
connected to a high speed CO.
FDM – enables Frequency Division
Multiplexing.
Enable | Disable
Type0 | Type1 | Type2 | Type3 |
Type3ET
To enable DataBoost set FramerType
to Type3ET.
Disable | Enable
Disable – terminates any host/API
interaction with the DSP (for testing
purposes)
Enable – enables host/API interaction
with the DSP.
<value>
The maximum number of bits per bin.
This can be any value between 1 and
15.
<value>
A value that sets the maximum
downstream rate for those applications
where it is necessary to limit the
downstream data rate.
Port CLI Commands
Default value
auto
None
Disable
Enable
FDM
Type3
Enable
15
4095
371