Bridge Set Trafficclassstatus - Ericsson HM4x0 Reference Manual

4.39

bridge set trafficclassstatus

4.39.1 Syntax
bridge set trafficclassstatus
{enable|disable|prioritybased}
4.39.2 Description
This command specifies the status of the traffic class mapping.
4.39.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
enable
disable
prioritybased
4.39.4 Example
--> bridge set trafficclassstatus enable
2/1553-ZAT 759 94 Uen B – December 2005
Description
Enable the mapping of regenerated
priority to its traffic class
Disable the mapping of regenerated
priority to its traffic class.
Traffic class mapping would happen
only if traffic class has not been
already set.
Bridge CLI Commands
Default value
disable
81