Ericsson HM4x0 Reference Manual page 603

Option
True
False
19.56.4 Example
Note that in the following example, TCP and UDP is enclosed in double
quotation marks because the values contain a space.
--> security application quake2 add port 27910 27910
"TCP and UDP" true "TCP and UDP"
Note that in the following example, the command fails because the port
clashes with an existing configuration. This would occur when running an
image containing the dsl-gateway system file, because the default MSN
Messenger (MSNIM) security application uses TCP port 1863.
--> security application myapp add port 1863 1863 TCP
false
webserver:File exists:Port clashes with an existing one.
2/1553-ZAT 759 94 Uen B – December 2005
Description
Enables a trigger to be used by this
application. Once set to true, you can
optionally set the trigger to use one of
the following address translation
types:
TCP|UDP|TCP and UDP|NONE
By default, the address translation
type is set to NONE.
A trigger is not required by this
application.
Security CLI Commands
Default value
N/A
N/A
603