Table of Contents
Advertisement
16.38
pppoa set transport routemask
16.38.1
Syntax
pppoa set transport {<name>|<number>} routemask <mask>
16.38.2
Description
This command sets the subnet mask used by the route that is created when a
PPP link comes up. If it is set to 0.0.0.0, the subnet mask is determined by the
IP address of the remote end of the link. The class of the IP address is
obtained during IPCP (Internet Protocol Control Protocol) negotiation.
16.38.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
mask
16.38.4
Example
--> pppoa set transport pppoa1 routemask 0.0.0.0
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
The subnet mask that is used for the
route that is created when a PPP link
comes up.
PPPoA CLI Commands
Default value
N/A
N/A
0.0.0.0
429
Advertisement
Table of Contents
