Bridge Add Fwdunreginterface Independent - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.50

bridge add fwdunreginterface independent

4.50.1 Syntax
bridge add fwdunreginterface independent
{<vlanname>|<vlannumber>} <interfacename>
4.50.2 Description
This command adds an interface to the egress interface list of the Forward
Unregistered Group of the named VLAN. The Forward Unregistered Group
represents the set of interfaces to which all the multicast frames would be
forwarded whose destination MAC address have no other forwarding
information available.
4.50.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
vlanname
vlannumber
interface
name
4.50.4 Example
--> bridge add fwdunreginterface independent VLAN_1
bridge1
92
Description
The name of an existing VLAN. See
the bridge add vlan command
to configure a new VLAN.
A number that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
The number appears in the first
column under the heading ID.
The name of a bridge interface that
has previously been added and
attached to a transport using the
bridge add interface and
bridge attach commands.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005