Pppoe Set Transport Mcr - Ericsson HM4x0 Reference Manual

PPPoE CLI Commands
17.31

pppoe set transport mcr

17.31.1 Syntax
pppoe set transport {<name>|<number>} mcr <min cell rate>
17.31.2 Description
This command sets the minimum cell rate for an existing PPPoE transport that
performs dialout over PVC.
17.31.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
min cell rate
17.31.4 Example
--> pppoe set transport pppoe1 mcr 0
484
Description
A name that identifies an existing
PPPoE transport. To display transport
names, use the pppoe list
transports command.
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the pppoe list
transports command.
Determines the minimum rate at which
ATM cells are allowed to be sent along
the PPPoE transport.
Default value
N/A
N/A
0
2/1553-ZAT 759 94 Uen B – December 2005