Bridge Show Vlan - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.23

bridge show vlan

4.23.1 Syntax
bridge show vlan {<name>|<number>}
4.23.2 Description
This command displays a single statically configured VLAN. See the bridge
add vlan command to statically configure a VLAN. The command displays all
the statically added egress interfaces of the VLAN. See the bridge add
vlaninterface command to add an interface to a VLAN.
The following information is displayed:
•
•
•
•
4.23.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
60
Filtering database associated with the VLAN.
VLAN ID for the VLAN.
Tagged egress interface list.
Untagged egress interface list.
Description
A name that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
To display the list of all the static
and dynamic VLANs in the bridge,
use the bridge list vlans
command. This command also
displays the egress interface for
each VLAN.
A number that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
The number appears in the first
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005