Sntp Client Cli Commands; Summary - Ericsson HM4x0 Reference Manual

SNTP Client CLI Commands

21 SNTP Client CLI Commands
This chapter describes the SNTP (Simple Network Time Protocol) Client CLI
commands.
21.1

Summary

The table below lists the SNTP Client commands provided by the CLI:
sntpclient add server
sntpclient delete server
sntpclient set timezone
sntpclient set poll-interval
sntpclient set timeout
sntpclient show status
624
sntpclient clear servers
sntpclient list servers
sntpclient set mode
sntpclient sync
sntpclient set retries
sntpclient set clock
2/1553-ZAT 759 94 Uen B – December 2005