Dhcpclient Set Interfaceconfig Interface - Ericsson HM4x0 Reference Manual

5.25

dhcpclient set interfaceconfig interface

5.25.1 Syntax
dhcpclient set interfaceconfig {<name>|<number>}
interface <ipinterface>
5.25.2 Description
This command sets the IP interface that will have its configuration set by the
DHCP client interface. The client interface can only set the IP configuration if
the IP interface has DHCP enabled, using the ip set interface dhcp
command.
5.25.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
ipinterface
5.25.4 Example
--> dhcpclient set interfaceconfig config1 interface
IpInterface
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
DHCP client interface. To display
client interface names, use the
dhcpclient list
interfaceconfigs command.
A number that identifies an existing
DHCP client interface. To display
client interface numbers, use the
dhcpclient list
interfaceconfigs command.
A name that identifies an existing IP
interface. The interface must have
DHCP enabled. To display interface
names, use the ip list
interfaces command.
DHCP Client CLI Commands
Default value
N/A
N/A
N/A
141