Security Set Ids Floodperiod - Ericsson HM4x0 Reference Manual

Security CLI Commands
19.42

security set IDS floodperiod

19.42.1 Syntax
security set IDS floodperiod <duration>
19.42.2 Description
This command allows you to set the time limit during which suspected SYN
floods are counted. If the number of SYN floods counted within the specified
duration is greater than the threshold set by either security set IDS
floodthreshold or security set IDS portfloodthreshold, the
suspected attacker is blocked for the time limit specified in the command
security set IDS DOSattackblock.
Note:
19.42.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
duration
19.42.4 Example
--> security set IDS floodperiod 60
588
This CLI command is case-sensitive. You must type the command
attributes exactly as they appear in the syntax section of this page. If
you do not use the same case-sensitive syntax, the command fails
and the CLI displays a syntax error message.
Description
The length of time (in seconds) that
suspected SYN floods are counted for.
Default value
10
2/1553-ZAT 759 94 Uen B – December 2005