Pppoa Set Transport Vci - Ericsson HM4x0 Reference Manual

PPPoA CLI Commands
16.44

pppoa set transport vci

16.44.1 Syntax
pppoa set transport {<name>|<number>} vci <vci>
16.44.2 Description
This command applies to existing PVC transports – it does not apply to SVC
transports. This command sets the Virtual Circuit Identifier.
16.44.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
vci
16.44.4 Example
--> pppoa set transport pppoa4 vci 800
438
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
Part of the ATM header. The VCI is a
tag that identifies which channel a cell
will travel over. The VCI can be any
value between 1 and 65535.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005