Table of Contents
Advertisement
Port CLI Commands
Attribute
NTRMode
PMmode
PSMode
PSDMask
PhysicalPort
Retrain
RxAutoBinAdjust
RxEndBin
RxStartBin
ShowtimeLed
Standard
372
Description
Disable | Enable
L2L3NotAllowed | L3NotAllowed |
L2L3Allowed
Inner | Outer
NonOvlp-Flat
NonOvlp-M1
NonOvlp-M2
NonOvlp-M1M2
Standard
<value>
A value between 0 and 14 that sets the
Utopia Level 2 Utopia address.
Disables/enables full retrain capability.
Disable | Enable
Disable – the bin settings configured
as the RxStartBin/RxEndBin
parameters are used.
Enable – DSP automatically adjust the
bin selection for receive signal.
<value>
A value that indicates the highest bin
number allowed for receive signal.
<value>
A value that indicates the lowest bin
number allowed for receive signal.
0 | 1 | 2 | 3 | 4 | None
Indicates the preferred standard
compliance. Multimode indicates that
the device automatically detects the
other end as one of the supported
standards. Valid values are:
ADI, ALCTL, ALCTL_14, G.Dmt,
G.Dmt.Bis, BisPlusAuto, BisPlusOnly,
G.Span, G.Span+, Multimode, g.lite,
t1.413
Default value
Disable
Standard
0
Enable
Disable
255
32
2
Multimode
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
